Yamada KH-16 Lubrication Equipments Selangor, Malaysia, Kuala Lumpur (KL), Seri Kembangan Supplier, Suppliers, Supply, Supplies

Merns (M) Sdn Bhd
37, Jalan Sb Indah 1/2a, Taman Sungai Besi Indah, 43300 Seri Kembangan, Selangor, Malaysia.

+603-8943 6339

+603-8943 6340

enquiries@merns.com.my

+60107814914

Message Us

Yamada KH-16

82 / 157

Operation / drive method		Product number	Model	Grease filling method					･ Nozzle micro hose can be used
Operation / drive method		Product number	Model	Hand jam	Cartridge tubular type	420mL bellows cartridge	210mL bellows cartridge	85mL bellows cartridge	･ Nozzle micro hose can be used
Manual	Lever type	854629	KH-120	○	×	×	×	○	○
		854627	KH-35	○	×	×	○	×	○
		854628	KH-32	○	×	×	×	×	○
		854655	KH-16	○	×	×	×	○	○
		854669S	KH-500S	○	×	○	×	×	○

* Click the model ''KH-120 / 35/32/16'' in the above table to display the dimensional drawing.

* SPK-2C / SPK-20C / SPK-2C-1M micro hoses cannot be attached to KH-16.
Various nozzles and micro hoses can be used.

Product No	Model	Overall length (mm)	Mass (kg)	Oil tank diameter (mm)	Capacity (clogged) (g)	Cartridge (g)	Available Grease (NLGI)		Discharge rate / stroke (g)	Maximum pressure (MPa)
Product No	Model	Overall length (mm)	Mass (kg)	Oil tank diameter (mm)	Capacity (clogged) (g)	Cartridge (g)	Hand jam	cartridge	Discharge rate / stroke (g)	Maximum pressure (MPa)
854629	KH-120	232	0.51	38	130	80	No.1	No.0-2	0.55	20
854627	KH-35	290	1.11	59.6	380	200	No.1	No.0-2	0.9	twenty five
854628	KH-32	412	1.27	59.6	180	---	No.1	―	1.5	twenty five
854655	KH-16	241	0.44	38	130	80	No.1	No.1-2	0.4	Ten
854669S	KH-500S	368	1.30	59.6	500	400	No.1	No.0-2	0.9	50

* KH-120 / 35/32 comes with HSP-1 nozzle as standard.
* CNP-2 is included as standard with KH-16.

* CNP-2 and SPK-3C are attached to KH-500S.
* The maximum pressure shown is the pressure when using the chuck nozzle (CNP-2).
* 　 Overall length and mass do not include nozzles.
* When grease is used by hand, it may not be possible to use it with
a low viscosity of NLGI1 or less depending on temperature conditions .

Grease set (in case of hand jam)

Nozzle removal / replacement method

When removing or replacing the attached nozzle or genuine option (hose / nozzle)
, press the nozzle mounting bracket (main body) with a spanner to remove it, and then install and replace a new nozzle.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*

Yamada KH-16

Quick Links

Recent Post

Contact