Share:
|
Operation / drive method |
Product number |
Model | Grease filling method |
･ Nozzle micro hose can be used |
|||||
| Hand jam |
Cartridge tubular type |
420mL bellows cartridge |
210mL bellows cartridge |
85mL bellows cartridge |
|||||
| Manual |
Lever type |
854629 | KH-120 | โ | × | × | × | โ | โ |
| 854627 | KH-35 | โ | × | × | โ | × | โ | ||
| 854628 | KH-32 | โ | × | × | × | × | โ | ||
| 854655 | KH-16 | โ | × | × | × | โ | โ | ||
|
854669S |
KH-500S |
โ |
× |
โ |
× |
× |
โ |
||
* Click the model ''KH-120 / 35/32/16'' in the above table to display the dimensional drawing.
* SPK-2C / SPK-20C / SPK-2C-1M micro hoses cannot be attached to KH-16.
Various nozzles and micro hoses can be used.
| Product No | Model |
Overall length (mm) |
Mass |
Oil tank diameter |
Capacity |
Cartridge |
Available
Grease |
Discharge rate / stroke (g) |
Maximum pressure (MPa) |
|
|
Hand jam |
cartridge |
|||||||||
| 854629 | KH-120 |
232 |
0.51 |
38 |
130 |
80 |
No.1 |
No.0-2 |
0.55 | 20 |
| 854627 | KH-35 |
290 |
1.11 |
59.6 |
380 |
200 |
No.1 |
No.0-2 |
0.9 | twenty five |
| 854628 | KH-32 |
412 |
1.27 |
59.6 |
180 |
--- |
No.1 |
โ |
1.5 | twenty five |
|
854655 |
KH-16 |
241 |
0.44 |
38 |
130 |
80 |
No.1 |
No.1-2 |
0.4 |
Ten |
|
854669S |
KH-500S |
368 |
1.30 |
59.6 |
500 |
400 |
No.1 |
No.0-2 |
0.9 |
50 |
* KH-120 / 35/32 comes with HSP-1 nozzle as standard.
* CNP-2 is included as standard with KH-16.
* CNP-2 and SPK-3C are attached to KH-500S.
* The maximum pressure shown is the pressure when using the chuck nozzle (CNP-2).
* ใ Overall length and mass do not include nozzles.
* When grease is used by hand, it may not be possible to use it with
a low viscosity of NLGI1 or less depending on temperature conditions .
When removing or replacing the attached nozzle or genuine option (hose / nozzle)
, press the nozzle mounting bracket (main body) with a spanner to remove it, and then install and replace a new nozzle.
Inquiry - Yamada KH-120
